These hub-centric wheel spacers are designed to fit vehicles with a 5x4.5" (114.3mm) bolt pattern and a 60.1mm center bore, allowing seamless installation of factory wheels with matching specifications. Engineered for a precise fit, these adapters are CNC-machined from high-strength 6061-T6 billet aluminum to ensure maximum durability, structural integrity, and performance under real-world driving conditions.
Each pair of adapters includes:
Two (2) premium-quality spacers
Pre-installed 12x1.5 thread wheel studs
A complete set of new open-end lug nuts
These adapters are hub-centric, meaning the raised center lip perfectly aligns with the wheel bore, centering the wheel on the hub to eliminate vibrations and improve ride quality.
Compatible Vehicle Applications Include:
Lexus: All models with 5x114.3 bolt pattern and 60.1mm hub bore, excluding ES 250, LS 460, and LS Hybrid (HL)
Toyota: Avalon, Camry (1992 and newer), Solara, MR2 (1990–1995), Supra (1989 and newer)
Important Installation Note:
Adapters that are 1 inch (25mm) thick or less may not fully cover your vehicle’s factory hub studs. If the stock studs extend beyond the face of the adapter, and your wheels do not have matching recesses on the back side, this could prevent the wheels from mounting flush to the adapter surface.
Improper flush mounting can lead to:
Uneven seating
Wheel vibration
Unsafe torque retention
To ensure proper and safe installation:
Verify that your wheels have back-side cavities deep enough to accommodate any protruding studs, or
If no such cavities exist, you must trim the factory studs so that they do not extend past the adapter face
This is a common requirement when using 1-inch thick spacer, due to the limited space between the wheel and the vehicle hub.
These hub-centric wheel spacers are designed to fit vehicles with a 5x4.5" (114.3mm) bolt pattern and a 60.1mm center bore, allowing seamless installation of factory wheels with matching specifications. Engineered for a precise fit, these adapters are CNC-machined from high-strength 6061-T6 billet aluminum to ensure maximum durability, structural integrity, and performance under real-world driving conditions.
Each pair of adapters includes:
Two (2) premium-quality spacers
Pre-installed 12x1.5 thread wheel studs
A complete set of new open-end lug nuts
These adapters are hub-centric, meaning the raised center lip perfectly aligns with the wheel bore, centering the wheel on the hub to eliminate vibrations and improve ride quality.
Compatible Vehicle Applications Include:
Lexus: All models with 5x114.3 bolt pattern and 60.1mm hub bore, excluding ES 250, LS 460, and LS Hybrid (HL)
Toyota: Avalon, Camry (1992 and newer), Solara, MR2 (1990–1995), Supra (1989 and newer)
Important Installation Note:
Adapters that are 1 inch (25mm) thick or less may not fully cover your vehicle’s factory hub studs. If the stock studs extend beyond the face of the adapter, and your wheels do not have matching recesses on the back side, this could prevent the wheels from mounting flush to the adapter surface.
Improper flush mounting can lead to:
Uneven seating
Wheel vibration
Unsafe torque retention
To ensure proper and safe installation:
Verify that your wheels have back-side cavities deep enough to accommodate any protruding studs, or
If no such cavities exist, you must trim the factory studs so that they do not extend past the adapter face
This is a common requirement when using 1-inch thick spacer, due to the limited space between the wheel and the vehicle hub.
